EPICS Controls Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  <20242025  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  <20242025 
<== Date ==> <== Thread ==>

Subject: motor record/Aerotech Automation1
From: John Dobbins via Tech-talk <tech-talk at aps.anl.gov>
To: "tech-talk at aps.anl.gov" <tech-talk at aps.anl.gov>
Cc: "Eric J. Edwards" <ericjedwards at cornell.edu>
Date: Mon, 16 Dec 2024 20:18:18 +0000
All,

I don't have a lot of experience with EPICS motors , so I don't know if this issue is specific to the motor record or the Aerotech Automation1 support.
[ Alma 9,  base-7.0.6, motor - current master, Automation1 - master from October ]

If I command a move, DMOV goes high before the move is complete.  Here is an example camonitor output for the motor RRBV and DMOV

S5C1_DCM_BRG_MTR:m1.RRBV       2024-12-16 14:49:02.376122 0  
S5C1_DCM_BRG_MTR:m1.RRBV       2024-12-16 14:49:03.380158 2  
S5C1_DCM_BRG_MTR:m1.RRBV       2024-12-16 14:49:04.384190 -1  
S5C1_DCM_BRG_MTR:m1.RRBV       2024-12-16 14:49:05.389343 1  
S5C1_DCM_BRG_MTR:m1.RRBV       2024-12-16 14:49:06.394224 3  
S5C1_DCM_BRG_MTR:m1.RRBV       2024-12-16 14:49:07.398213 -1  
S5C1_DCM_BRG_MTR:m1.DMOV       2024-12-16 14:49:07.398213 0  
S5C1_DCM_BRG_MTR:m1.RRBV       2024-12-16 14:49:07.754199 0  
S5C1_DCM_BRG_MTR:m1.RRBV       2024-12-16 14:49:07.858188 17189  
S5C1_DCM_BRG_MTR:m1.RRBV       2024-12-16 14:49:07.962166 105223  
S5C1_DCM_BRG_MTR:m1.RRBV       2024-12-16 14:49:08.066075 263412  
S5C1_DCM_BRG_MTR:m1.RRBV       2024-12-16 14:49:08.170173 441394  
S5C1_DCM_BRG_MTR:m1.RRBV       2024-12-16 14:49:08.274134 622471  
S5C1_DCM_BRG_MTR:m1.RRBV       2024-12-16 14:49:08.378163 776297  
S5C1_DCM_BRG_MTR:m1.RRBV       2024-12-16 14:49:08.482268 854418  
S5C1_DCM_BRG_MTR:m1.DMOV       2024-12-16 14:49:08.482268 1  
S5C1_DCM_BRG_MTR:m1.RRBV       2024-12-16 14:49:09.487278 874672  
S5C1_DCM_BRG_MTR:m1.RRBV       2024-12-16 14:49:10.491359 874669  
S5C1_DCM_BRG_MTR:m1.RRBV       2024-12-16 14:49:11.495310 874668  
S5C1_DCM_BRG_MTR:m1.RRBV       2024-12-16 14:49:12.499206 874666  
S5C1_DCM_BRG_MTR:m1.RRBV       2024-12-16 14:49:13.503320 874668

One can see that DMOV has transitioned to one simultaneous with a position short of the final value.

What can I do about this?

Thanks,

John Dobbins

Research Support Specialist
Cornell High Energy Synchrotron Source
Cornell University





Replies:
Re: motor record/Aerotech Automation1 Mark Rivers via Tech-talk

Navigate by Date:
Prev: Re: Building AreaDetector Vimba driver V 1.5 Steven Hunt via Tech-talk
Next: Re: motor record/Aerotech Automation1 Mark Rivers via Tech-talk
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  <20242025 
Navigate by Thread:
Prev: Re: Building AreaDetector Vimba driver V 1.5 Mark Rivers via Tech-talk
Next: Re: motor record/Aerotech Automation1 Mark Rivers via Tech-talk
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  <20242025 
ANJ, 16 Dec 2024 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions ·
· Download · Search · IRMIS · Talk · Documents · Links · Licensing ·