RE: CANbus/CANopen EPICS users

["Pearson, Matthew via Tech-talk" <tech-talk at aps.anl.gov>]

Hi,

 

Not CANbus, but Profibus, and we use a Moxa protocol gateway to convert to Modbus/TCP, and then we just use the EPICS modbus support. Here’s the CANbus version:

 

https://www.moxa.com/en/products/industrial-edge-connectivity/protocol-gateways/modbus-tcp-gateways/mgate-5121-series

 

Cheers,

Matt

 

From: Tech-talk <tech-talk-bounces at aps.anl.gov> On Behalf Of Timo Korhonen via Tech-talk
Sent: Wednesday, October 14, 2026 8:36 AM
To: Tech-talk <tech-talk at aps.anl.gov>
Subject: [EXTERNAL] CANbus/CANopen EPICS users

 

Dear tech-talkers, is anybody still using CANbus with EPICS? What would be the most up-to-date support module? Asking for a friend… 😉 Cheers, Timo (ESS) ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍

Dear tech-talkers,

 

is anybody still using CANbus with EPICS? What would be the most up-to-date support module?

 

Asking for a friend… 😉

 

Cheers,

 

Timo (ESS)