Subject: |
re: digitizer boards |
From: |
Matthias Clausen DESY -MKV2/KRYK- <[email protected]> |
Date: |
Mon, 28 Nov 1994 14:47:30 EST |
Chip writes:
>I am interested in discovering what VME/VXI transient digitizer boards
>are currently supported under EPICS. Scanning old mail, I find
>Jim Kowalkowski did the Pentek 6241a. Are there any others in the
>few MHz range, 12 bit?
Did you have a look at the Omnibyte boards?
They are standard fast ADC boards @ 5MHz four channels 12 bit
128kb for each channel.
If your digitized signal is within this range ...
Matthias
----------------------------------------------------------------
Matthias Clausen Deutsches Elektronen Synchrotron
Gruppe: MKV2/KRYK DESY/Hamburg, Germany
- Navigate by Date:
- Prev:
Re: Infrequent I/O hardware Steve Lewis
- Next:
Allen-Bradley Vs. CAMAC Carl Dickey
- Index:
<1994>
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: digitizer boards Ned Arnold
- Next:
Infrequent I/O hardware Ric Claus
- Index:
<1994>
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|