Steve Hunt wrote:
>
> the problem may be that I need a full pathname -
> is this a new feature in 5.3 ?
> -> dbLoadDatabase("/home/pss123/sls/hunt/epics/phase1.dbd")
> value = 0 = 0x0
> -
Hi Steve,
I had to go through the same problem that you have now.
I rebuilt the VxWorks 5.3 kernel with the option
INCLUDE_CONFIGURATION_5_2 and I do not need absolute paths
since. So far, everything looks fine.
Josep Perlas
--
_________________________________________________________________
Dr. Josep A. Perlas - Head of Control System and Power Technology
Lab. Sincrotro Barcelona - IFAE -------- Tel: (+34 3)581.28.38
Edifici Cn, Campus UAB ------------ Fax: (+34 3)581.19.38
E-08193 Bellaterra (Barcelona) SPAIN ---- email: [email protected]
_________________________________________________________________
- References:
- vxWorks 5.3 - yet more Steve Hunt
- Navigate by Date:
- Prev:
NetworkTimeProtocol server on windows NT Bob Dalesio
- Next:
Subscribe Eric Norum
- Index:
1994
1995
1996
<1997>
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
vxWorks 5.3 - yet more Steve Hunt
- Next:
NetworkTimeProtocol server on windows NT Bob Dalesio
- Index:
1994
1995
1996
<1997>
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
| 
·
Home
·
News
·
About
·
Base
·
Modules
·
Extensions
·
Distributions
·
Download
·