Josep A. Perlas writes:
> Hello everybody,
>
> we need to control three RS-485 instruments for our test bench.
> We intend to use the GreenSpring Industry Pack carrier with a
> proper IP module and this is were we need help. We have, in
> principle, three choices (all from GrenSpring Computers):
>
> 1) the IP-Octal 485
> 2) the IP-MP Serial
> 3) the IP-Universal Serial
>
We have drivers for the GreenSpring Octal 232, 422, and 485. These are
somewhat based on the SCC2698 OctalUart driver originally developed
by Jim Kowalkowski as part of HiDEOS. We also use the drvIpac library
from RGO for configuration of the IP carrier (we use the VIPC 610).
The device support we use is not much more than a wrapper around
VxWorks message queues.
Aloha,
Peregrine
Peregrine M. McGehee
Telescope Control Systems Group
Canada-France-Hawaii Telescope Corporation
- References:
- Serial comms solution Josep A. Perlas
- Navigate by Date:
- Prev:
Serial comms solution Josep A. Perlas
- Next:
Problem with VMS Multinet 4.0RevB - Channel Access Connects saa
- Index:
1994
1995
1996
<1997>
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Serial comms solution Josep A. Perlas
- Next:
Re: Serial comms solution Peregrine McGehee
- Index:
1994
1995
1996
<1997>
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|