Ron Chestnut wrote:
>
> Hello,
>
> Has anybody used this model DCM? The differences between it and that whose support
> we picked up from APS is that it can handle a maximum of 8 16-bit words, not the
> 64 of the APS DCM.
>
> We figure we'll have to be more economical with the header information and
> basically change 64 to 8 where applicable.
>
> Any pointers to DCM modifications or hints on necessary changes to Marty's code
> would be appreciated.
>
> /Ron Chestnut
This sounds very similar to the SLCDCM.
It might be worth trying the SLCDCM support to see if it works.
If not it would be a good starting point.
Marty Kraimer
- References:
- Alan Bradley model 1747 DCM Ron Chestnut
- Navigate by Date:
- Prev:
RE: Unique Channel Names??? -> redundant CA servers Matthias Clausen DESY -MKS-2/KRYK-
- Next:
MEDM 2.3.5 Released Ken Evans
- Index:
1994
1995
1996
1997
1998
<1999>
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Alan Bradley model 1747 DCM Ron Chestnut
- Next:
TCL I/F for waveform records Bill Cruise
- Index:
1994
1995
1996
1997
1998
<1999>
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|