> [...] In Germany we have some special
> charater for oe, ue, ae, they have the ASCII value 123,124,125. If I
> used this characters in the DESC field the dbLoadRecord gives some error
> messages like "error in line..." In the US-ASCII-Set 123 and 125 stands
> for { }, are this character not allowed in DESC field ?, which other
> characters are also not allowed ?
> We are using epics 3.13 beta 11.
This behaviour has been changed in beta12. For a complete list of
changes please refer to the "EPICS Release Notes R3.13.0Beta12"
(17-JUN-98). This document is linked to the main EPICS documentation
page at
http://www-csr.bessy.de/asd/controls/epics/EpicsDocumentation/WWWPages/EpicsDoc.html
(or at epics.aps.anl.gov, of course.)
Hope this helps,
Ralph
- References:
- Character in DESC field Olaf Krebs
- Navigate by Date:
- Prev:
Strange Behavior on 33Mhz MV167 boards Eric Bjorklund, NPSM
- Next:
possible to write bootrom to flash memory without TFTP? Zheng Lifang
- Index:
1994
1995
1996
1997
1998
<1999>
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: Character in DESC field Marty Kraimer
- Next:
Looking for VxWorks/EPICS driver for VHQ202M HV power supply Dominique Boutigny
- Index:
1994
1995
1996
1997
1998
<1999>
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|