Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  <19992000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  Index 1994  1995  1996  1997  1998  <19992000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020 
<== Date ==> <== Thread ==>

Subject: ADC boards
From: Liam O Neill <loneill@fatale.mit.edu>
To: tech-talk <tech-talk@aps.anl.gov>
Date: Mon, 16 Aug 1999 13:00:10 -0400 (EDT)
Hi
I was wondering if anyone knew of a "good" voltage integrating ADC I could
use. It should run on a VME crate, with at least 8 channels, at at least
600Hz and be triggerable, either via software or some extranal input. I'd
imagine there would be lots around, but getting an EPICS driver for them
is the problem.
Thanks
Liam



Navigate by Date:
Prev: Re: dynamic INP/OUT evaluation Luedeke Andreas
Next: Sequencer on Host system (or something similar) Mathias . Muench
Index: 1994  1995  1996  1997  1998  <19992000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020 
Navigate by Thread:
Prev: Re: dynamic INP/OUT evaluation Luedeke Andreas
Next: Sequencer on Host system (or something similar) Mathias . Muench
Index: 1994  1995  1996  1997  1998  <19992000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020 
ANJ, 10 Aug 2010 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·