Russell Page wrote:
> Hello:
>
> I am installing an NI-1014 into a VME crate and wish to have it talk to a DG535
> digital delay generator via a GPIB-488 bus, under EPICS. I have the complete
> manuals for both the NI-1014 and the DG535. I also have a copy of "GPIB Device
> Support" by John Winans (dated 9/93).
>
> When I first attempted this about 2 years ago, I had some problems with the
> interfacing (I was using EPICS R3.13.0beta4). I remember using a generic driver
> of some kind that allowed me to do some rudimentary communications. I am hoping
> someone has done some more work in this area and/or updated some documentation
> since then. I really need to get this up and running ASAP. Can anyone out there
> assist me?
>
> TIA
> Russ Page
> MIT - Bates Linac
Russ,
I have Epics 3.13 device support for communicating with a DG535
from an MV167/177 using an Industry Pack IP-488 to handle the GPIB.
If this would be a help let me know.
--------------------------------------------------
Al Grippo/ Computer Scientist/ TJNAF
Newport News, VA/ 757-269-5015/ [email protected]
--------------------------------------------------
- References:
- Using GPIB with EPICS Russell Page
- Navigate by Date:
- Prev:
Re: CA monitors...Update Garrett D. Rinehart
- Next:
HP crate driver? plc
- Index:
1994
1995
1996
1997
1998
<1999>
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Using GPIB with EPICS Russell Page
- Next:
Re: CA monitors...Update Garrett D. Rinehart
- Index:
1994
1995
1996
1997
1998
<1999>
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|