"Leonard J. Reder" wrote:
>
> I looked into Galil VME controller boards but it only will
> control 4 motors. Nominally we need a solution that can
> control 8 or more motors per VME board. And the VME board
> should be supported via EPICS device support.
>
The motor record has device support for Oregon Micro Systems
VME58-8S, which can provide up to eight axes of DC servo control.
The motor record's home page is;
http://www.aps.anl.gov/upd/people/sluiter/epics/modules/mechanism/motor/index.html
- References:
- Newport 850f motor control Leonard J. Reder
- Navigate by Date:
- Prev:
osiTimerQueue pure virtual function John A. Priller
- Next:
RE: osiTimerQueue pure virtual function Jeff Hill
- Index:
1994
1995
1996
1997
1998
1999
<2000>
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: EPICS support for Galil motor controllers Graham Waters
- Next:
RE: Newport 850f motor control Joe Ballek
- Index:
1994
1995
1996
1997
1998
1999
<2000>
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
| 
·
Home
·
News
·
About
·
Base
·
Modules
·
Extensions
·
Distributions
·
Download
·