Experimental Physics and
Industrial Control System

Hi, 

GongFa Liu wrote:
> 
> Hi all,
> 
> Another ca error information is in the following:
> 
> 0x3d56594 (CA event): CAS: TCP send to "192.168.1.32:44960" failed because
> "errno = 0x320001"
> 
> Could anybody give me some idea about it?
> 
> Thanks in advance.
> 
> Gongfa Liu
> 
> >
> > epics has run successfully for several monthes on our
> > x86 based ioc. But today we get the following error:
> >
> > 0x3e16a2c (CA TCP): CAS: Client accept error was "errno = 0xd0004"
> > 0x3e16a2c (CA TCP): CAS: Client accept error was "errno = 0xd0004"
> > iocLogClient: no socket error errno = 0xd0004
> >
> > Could anybody give me some idea about it?
> >
> > Thanks in advance.
> >
> >
Using sterror() function, I got the following information releted to
these error codes.

-> printf "%s",strerror(0xd0004)
S_iosLib_TOO_MANY_OPEN_FILESvalue = 28 = 0x1c
-> printf "%s",strerror(0x320001)
S_hostLib_UNKNOWN_HOSTvalue = 22 = 0x16
->

Noboru Yamamoto
KEKB control group
KEK, JAPAN

References:

Another ca error GongFa Liu

Navigate by Date:

Prev: Job Opportunity in Astronomy Nick Rees

Next: address change for Phase Three Logic Chong Lee

Index: 1994  1995  1996  1997  1998  1999  <2000>  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: Another ca error GongFa Liu

Next: scan tasks and monitors??? Leonard J. Reder

Index: 1994  1995  1996  1997  1998  1999  <2000>  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024