EPICS Controls Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  <20002001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  <20002001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: compiling epics in tcsh
From: Lifang Zheng <[email protected]>
To: tech-talk <[email protected]>
Date: Fri, 24 Nov 2000 15:07:16 +0800
Hi all,

Today I built EPICS/base R3.13.3 for two BSPs with "tcsh" in my
solaris2.7 without any problem.  The steps are simple:

1. copy CONFIG_SITE.Vx.ppc604 to CONFIG_SITE.Vx.mv162 and
CONFIG_SITE.Vx.mv2303.
In CONFIG_SITE.Vx.mv162  define VX_DIR_YES = /ssrf/wind/T1.0.1/68K
In CONFIG_SITE.Vx.mv2303 define VX_DIR_YES = /ssrf/wind/T1.0.1/PPC

2. Use gnumake to build.

I also succeeded in building R3.13.1 by copying all config files from
R3.13.3.


Lifang



Navigate by Date:
Prev: compiling epics in tcsh Lifang Zheng
Next: Re: pulseTrain record device support?? Leonard J. Reder
Index: 1994  1995  1996  1997  1998  1999  <20002001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: compiling epics in tcsh Lifang Zheng
Next: Re: pulseTrain record device support?? Leonard J. Reder
Index: 1994  1995  1996  1997  1998  1999  <20002001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
ANJ, 10 Aug 2010 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·