Experimental Physics and
Industrial Control System

Mark Rivers wrote:
> 
> To know if you are using the "motor" or "steppermotor" records do the
> following:
> - Get a connection to the VME crate console, either via serial port or
> telnet.
> - Type the command
>   dbl "motor"

Since (i believe) base release 3.13.2, there is a "pseudo"-field named
"RTYP", that you can directly query by CA. It contains the record type
name.

Ben

References:

RE: Newbie trying to move steppers in a CA client (fwd) Mark Rivers

Navigate by Date:

Prev: Help about RAMP shen guobao

Next: devLib.c vs devLibVxWorks.c Brian McAllister

Index: 1994  1995  1996  1997  1998  1999  2000  <2001>  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: RE: Newbie trying to move steppers in a CA client (fwd) Mark Rivers

Next: block output record Geoff Savage

Index: 1994  1995  1996  1997  1998  1999  2000  <2001>  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024