On Tue, Jun 26, 2001 at 08:28:36PM -0500, John Quintana wrote:
> Anyway, I was wondering if anyone else was interested and or working
> on this approach or if we were a "lone wolf". It would seem to me
> that the prospects of a true Linux IOC would really lower the barrier
> for EPICS since VxWorks isn't needed for the nondemanding applications,
> the basic "Crate and Controller" can be a barebones PC box up to a high
> end CompactPCI system. In the near future [depending on workload], I
> plan on working in some Binary Input and Binary Output Boards. I would
> also like to get the drivers for the Koyo PLC Direct systems and see if I
> can't get these working using Linux serial ports. Discussion can take
> place here or offline depending on what is most appropriate.
Can you send me a copy of the changes that you had to make to talk to the
Cyberresearch boards? It would be useful to see some examples of what is
required to talk to real devices under Linux via ioccore.
Bill Lavender
[email protected]
- Replies:
- Re: IOC Controllers Under Linux (or IOC's for < $500) Eric Norum
- References:
- IOC Controllers Under Linux (or IOC's for < $500) John Quintana
- Navigate by Date:
- Prev:
SST-PFB-VME Roy Emerson
- Next:
Re: IOC Controllers Under Linux (or IOC's for < $500) Eric Norum
- Index:
1994
1995
1996
1997
1998
1999
2000
<2001>
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
IOC Controllers Under Linux (or IOC's for < $500) John Quintana
- Next:
Re: IOC Controllers Under Linux (or IOC's for < $500) Eric Norum
- Index:
1994
1995
1996
1997
1998
1999
2000
<2001>
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|