Hi Brian,
I am actually using sequencer version 2.0.2 under EPICS R3.14.0beta1.
You are right you need EPICS R3.14. to build sequencer 2.0 and greater.
Thanks,
*******************************************
Ernest L. Williams Jr.
SNS Control Systems Group, ORNL
701 Scarboro Rd., MS 6473
Oak Ridge, TN 37830
Phone 865-241-9071
e-mail: [email protected]
Fax 865-574-4799
******************************************
----- Original Message -----
From: "Brian McAllister" <[email protected]>
To: "Peter Kurpis" <[email protected]>
Cc: <[email protected]>
Sent: Monday, March 25, 2002 7:02 PM
Subject: Re: seq 1.9.4
>
> >>> On 3/25/2002 at 13:53:56 -1000, Peter Kurpis wrote:
>
> >> I think this is where I got seq-1.9.5 from, but it doesn't seem to be
> >> there anymore.
>
> > Yes, you're right.
>
> > However, to my recollection, versions before 2.0.0 were very alphaish,
> > and were probably removed for that reason. 2.0.0 was posted in April
> > 2000.
>
> > Any reason not to use the latest?
>
> My impression was that V2.0 was the "Unix Sequencer" and required EPICS
> 3.14 to build.
>
> I could easily be wrong, as I have never actually looked at the code for
> 2.0.
>
> ----
> Brian McAllister Controls Programmer/Beam Physicist
> [email protected] MIT-Bates Linear Accelerator
> (617) 253-9537 Middleton, MA
>
>
- Replies:
- Re: seq 1.9.4 Benjamin Sailer
- References:
- Re: seq 1.9.4 Brian McAllister
- Navigate by Date:
- Prev:
Re: seq 1.9.4 Peter Kurpis
- Next:
Re: seq 1.9.4 Benjamin Sailer
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
<2002>
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: seq 1.9.4 Brian McAllister
- Next:
Re: seq 1.9.4 Benjamin Sailer
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
<2002>
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|