Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  2000  2001  2002  <20032004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  <20032004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019 
<== Date ==> <== Thread ==>

Subject: Re: CAMAC problems
From: Steven Hartman <hartman@fel.duke.edu>
To: "Hammonds, John P." <jphammonds@anl.gov>
Cc: tech-talk@aps.anl.gov
Date: Thu, 24 Apr 2003 10:30:42 -0400 (EDT)
On Thu, 17 Apr 2003, Hammonds, John P. wrote:

> With one of our boards I get Errors back from EPICS and the longitudinal
> parity error light on the Hytec board.

I would suspect a bad cable/connection, or perhaps too long of a bus.

-- 
Steve Hartman
hartman@fel.duke.edu | 919-660-2650
Duke Free Electron Laser Laboratory

References:
CAMAC problems Hammonds, John P.

Navigate by Date:
Prev: pdbbase usage and scope Wells, Randall
Next: portable channel access server John Sinclair
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  <20032004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019 
Navigate by Thread:
Prev: CAMAC problems Hammonds, John P.
Next: Parallel port hardware and drivers Mark Rivers
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  <20032004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019 
ANJ, 10 Aug 2010 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·