RE: EPICS Sequencer v.2.0.4 on EPICS base v.3.14.1

["Chestnut, Ronald P." <ronc@SLAC.Stanford.EDU>]

Misaki-san,

One of our software engineers has done exactly what you are asking about. I will ask Kukhee Kim to answer separately. I am also sending a separate E-mail with Kukhee's comments to Marty on his experience building the 2.0.4 sequencer.

/Ron Chestnut

-----Original Message-----
From: Misaki (KOBAYASHI) KOMIYAMA [mailto:misaki@postman.riken.go.jp] 
Sent: Tuesday, June 10, 2003 5:57 PM
To: tech-talk@aps.anl.gov
Subject: EPICS Sequencer v.2.0.4 on EPICS base v.3.14.1


Dear All,

Hello.

I'm sorry to trouble you, but I have a question.
Can I use the EPICS Sequencer v.2.0.4 on the EPICS base v.3.14.1? I have a Linux (Redhat8) machine which includes EPICS base v.3.14.1. When I tried to install the v.2.0.4-sequencer programs on it as following the guide in the EPICS Sequencer home page, I failed. The error message said that devSequencer.c" could not find "epicsExport.h".

On the other hand, when I tried to install the v.2.0.2-sequencer programs on the Linux machine, I also failed in compiling the programs. The error message was appeared, which was reported in the sequencer home page; "structure has no member named 'next'. I tried to find the v.2.0.3-programs, but I could not find it.

Now, I cannot install EPICS Sequencer in my machine.
May I ask you some helps to me?

Best Regards,
Misaki KOMIYAMA (RIKEN, JAPAN)