Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  2000  2001  2002  <20032004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  <20032004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020 
<== Date ==> <== Thread ==>

Subject: Re: about building caTCL
From: Steven Hartman <hartman@fel.duke.edu>
To: zhaozhuo <zhaozhuo@ihep.ac.cn>
Cc: tech-talk <tech-talk@aps.anl.gov>
Date: Tue, 5 Aug 2003 10:52:38 -0400 (EDT)
On Tue, 5 Aug 2003, zhaozhuo wrote:

> gmake[1]: ranlib: Command not found

ranlib is in /usr/ccs/bin/. Make sure that is in your PATH.

> ../tclCa.h:126: blt.h: No such file or directory

blt.h should be installed when you finish installing blt. When building
tclCa, it looks for it in $BLT_INC as defined in
extensions/config/CONFIG_SITE.Host.solaris in your case.

-- 
Steve Hartman
hartman@fel.duke.edu | 919-660-2650
Duke Free Electron Laser Laboratory

References:
about building caTCL zhaozhuo

Navigate by Date:
Prev: about building caTCL zhaozhuo
Next: Building simple serial device example Eric Williams
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  <20032004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020 
Navigate by Thread:
Prev: about building caTCL zhaozhuo
Next: Building simple serial device example Eric Williams
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  <20032004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020 
ANJ, 10 Aug 2010 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·