Experimental Physics and
Industrial Control System

Matt Bickley <[email protected]> · Tue, 08 Mar 2005 13:42:30 -0500

John,
   At Jefferson lab, for the accelerator, free electron laser,
central helium liquifier and some of the experimental end station
slow controls:
For operations we use:
EPICS 3.13.2
Host: HPUX 11.11
Target: VxWorks 5.3 and a little linux
Processors: principally 68K and PPC with a few x86
Busses: VME/CAMAC/GPIB/Serial/CAN
We are starting to work with:
EPICS 3.14.6
Host: SUN 5.8
Target: VxWorks 5.5.1
John Dobbins wrote:

Dear All,
In March of 2000 Markus Janousch of SLS posted a message to Tech-Talk
inquiring what version of EPICS facilities were currently using. He
summarized the results at:
http://www.sls.psi.ch/controls/software/epics_versions.html
At Cornell we are in the beginning stages of deploying EPICS and as the
posted information is now dated I would like to ask this question again.
I would be happy to summarize and post the results as Markus did. If
you could respond with the following info. it would be greatly appreciated.
Site:
Project:
(Operational)EPICS Version:
Host OS and Version:
Target OS and Version:
Target Processor:
Field Buses:
Comments:

--
Matthew Bickley                       Email: [email protected]
Computer Scientist                    Telephone: 757-269-7347
TJNAF

Experimental Physics and Industrial Control System

Experimental Physics and
Industrial Control System