We are using the Pace Scientific XR5 humidity sensor. They've are fixed
some firmware problems but next week we should have all that resolved. We
use drvAscii and genSub to read it. We are also using EPICS 3.14.6 running
on Solaris if that interests you.
http://www.pace-sci.com/data-loggers-xr5.htm
Wayne
> -----Original Message-----
> From: Maren Purves [mailto:[email protected]]
> Sent: Tuesday, March 22, 2005 8:04 AM
> To: J. Lewis Muir
> Cc: [email protected]
> Subject: Re: Support for room temperature and humidity sensors
>
>
> We have serial line units made by Vaisala, model # escapes me
> right now (writing this from home). They work well and we
> have capfast
> schematics (3.13.8). They don't need extra device support or drivers.
>
> Maren
>
> On Tue, 22 Mar 2005, J. Lewis Muir wrote:
>
> > Are there room temperature and humidity sensors that are
> supported in
> > EPICS?
> >
> > I would like to have a room temperature and humidity sensor in an
> > end-station and monitor it with EPICS just like monitoring or
> > controlling any other beamline device.
> >
> > Thanks!
> >
>
- Navigate by Date:
- Prev:
Re: CA gateway failure Andrew Johnson
- Next:
Re: CA gateway failure Ernest L. Williams Jr.
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
<2005>
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: Support for room temperature and humidity sensors J. Lewis Muir
- Next:
RE: CA gateway failure Kenneth Evans, Jr.
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
<2005>
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|