EPICS Controls Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  <20052006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  <20052006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: about using NI-1014 with VME/Linux
From: "Jun-ichi Odagiri" <[email protected]>
To: <[email protected]>
Date: Thu, 22 Dec 2005 18:35:01 +0900
Hi, all;

I'm thinking of using NI-1014 GPIB controller with an Intel-based
VMIVME-series CPU running EPICS 3.14.7 on Linux.
Is there anyone who has tested the board with the driver, drvNi1014,
included in asynDriver on a CPU running Linux?

I'll appreciate any kind of information, comments, or advice on this issue.

Jun-ichi Odagiri
High Energy Accelerator Research Organization, KEK
Oho 1-1, Tsukuba, Ibaraki, Japan



Replies:
Re: about using NI-1014 with VME/Linux Eric Norum

Navigate by Date:
Prev: Re: epics extension Benjamin Franksen
Next: RE: record field definition and float Liyu, Andrei
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  <20052006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: RE: record field definition and float Liyu, Andrei
Next: Re: about using NI-1014 with VME/Linux Eric Norum
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  <20052006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
ANJ, 02 Sep 2010 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·