Did you mean scan rate of .1 Hz or .1 seconds?
> -----Original Message-----
> From: [email protected]
> [mailto:[email protected]] On Behalf Of Emmanuel Mayssat
> Sent: Wednesday, February 06, 2008 1:06 PM
> To: epics
> Subject: medm weirdness
>
> Hello,
>
> I am using medm and have noticed something strange.
> I have a display with 32 waveforms.
> I can open related displays associated with each of those waveforms
> (like autoscaled waveform, moving average, etc.)
>
> I noticed that when I open or close a related display ( actually any
> display attached to same medm process), all the waveforms freeze.
> The IOC is working correctly.
>
> As if none of the monitors were working.
> When I open another related display, then the displays update again.
>
> Have you ever experienced this?
> Any idea where this could be coming from?
>
> I suspect the PV traffic could be an issue.
> Let's assume that I have 40 waveforms with 1200 samples each
> and a scan
> (and updating) rate of .1 Hz.
> Is medm overloaded?
>
> Regards,
> --
> E
>
>
- Replies:
- RE: medm weirdness Emmanuel Mayssat
- References:
- medm weirdness Emmanuel Mayssat
- Navigate by Date:
- Prev:
medm weirdness Emmanuel Mayssat
- Next:
RE: medm weirdness Emmanuel Mayssat
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
<2008>
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
medm weirdness Emmanuel Mayssat
- Next:
RE: medm weirdness Emmanuel Mayssat
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
<2008>
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|