Steve,
My Modbus driver should talk to it, but you would need to add the device-specific code.
http://cars.uchicago.edu/software/epics/modbus.html
Mark
________________________________
From: [email protected] on behalf of Steve Lewis
Sent: Fri 5/16/2008 4:59 PM
To: [email protected]
Cc: Keith Kishiyama
Subject: Looking for support for Eurotherm 2404 PID
The Eurotherm 2404 PID is a temperature controller that uses the
Modbus protocol over a serial . Does anyone have a streamdevice/asyn
protocol or any other device/driver support for it?
--
______________________________________________________________
Stephen A. Lewis |
Linac Coherent Light Source | [email protected]
Lawrence Livermore National Laboratory | Tel: 925.423.4751
7000 East Ave, L-210 | FAX: 925.423.1488
Livermore, CA 94550 | http://www.llnl.gov <http://www.llnl.gov/>
- Replies:
- RE: Looking for support for Eurotherm 2404 PID Mark Rivers
- References:
- Looking for support for Eurotherm 2404 PID Steve Lewis
- Navigate by Date:
- Prev:
Looking for support for Eurotherm 2404 PID Steve Lewis
- Next:
RE: Looking for support for Eurotherm 2404 PID Mark Rivers
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
<2008>
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Looking for support for Eurotherm 2404 PID Steve Lewis
- Next:
RE: Looking for support for Eurotherm 2404 PID Mark Rivers
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
<2008>
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|