Hi:
Read & try to use setup/setup.sh which creates that edmPvObjects file.
-Kay
[email protected] on 8/1/08 12:44 :
> Hello,
>
> I am trying to build and run edm. I am using the instructions from
> "extensions/src/edm/README.install" that came in the tarfile. I am to
> the following point in the instructions:
>> As an example here is what we set at the SNS:
>>
>> -- EDMPVOBJECTS=$EPICS_EXTENSIONS/ext_pref/edm
>> -- EDMOBJECTS=$EPICS_EXTENSIONS/ext_pref/edm
>> -- EDMHELPFILES=$EPICS_EXTENSIONS/src/edm/helpFiles
>> -- EDMFILES=$EPICS_EXTENSIONS/ext_pref/edm
>> --
>> EDMDATAFILES=./:$IOCTOP/<system1>/opi/edl:$IOCTOP/<system2>/opi/edl
>>
>> Also, we will make available the $EPICS_EXTENSIONS/ext_pref/edm
>> as an example.
>> This will be tarred up as ext_pref-edm.tar on our ftp site:
>> (ftp://snsftp.sns.ornl.gov/UPLOAD/controls/edm)
>> Some of the configuration steps may be discussed in the edm
>> documentation located
>> in the following: $EPICS_EXTENSIONS/src/edm/doc
> I am having problems with the ftp site referenced above. First, I got
> an access error, then when I tried again I did not get an access error
> but the directory was empty. I was expecting to find an example
> edmPvObjects file. Help would be appreciated?
>
> Thanks,
> Carl Schumann
>
- References:
- EDM installation issues edmPvObjects, etc.? Carl Schumann
- Navigate by Date:
- Prev:
EDM installation issues edmPvObjects, etc.? Carl Schumann
- Next:
Re: EDM installation issues edmPvObjects, etc.? Kevin Anderson
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
<2008>
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
EDM installation issues edmPvObjects, etc.? Carl Schumann
- Next:
Re: EDM installation issues edmPvObjects, etc.? Kevin Anderson
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
<2008>
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|