Experimental Physics and
Industrial Control System

"Mark Rivers" <[email protected]> · Tue, 14 Apr 2009 15:25:48 -0500

I have updated Mohan's support for the Gamma Digitel MPC ion pump controllers so that it also supports the titanium sublimation pump and a number of other features.  It can be found in the synApps "ip" module.  There is also support for the MKS vacuum gauges and Lakeshore 340 controller there.

Mark

________________________________

From: [email protected] on behalf of Mohan Ramanathan
Sent: Tue 4/14/2009 3:18 PM
To: Xu, Huijuan
Cc: EPICS
Subject: Re: EPICS driver for vacuum devices

hi: 

At APS we use the Granville Philip Vacuum gauges and Televac gauages.  For pumps we use the Gamma One pumps and controllers.
I have a ASYN driver for these.

let me know if you need these. Will post the links.
mohan

On Apr 14, 2009, at 3:08 PM, Xu, Huijuan wrote:

	Hello folks,
	Does anyone have the EPICS driver for Varian multi-gauge controller, Gamma digital ion pump controller or LakeShore model 340 temperature controller? They are widely used and the drivers may already be developed. Thanks in advance for any help.

	Regards,
	Huijuan

-----------------------------------------------------------------------------------------------------
Mohan Ramanathan Senior Beamline Engineer
[email protected] Advanced Photon Source
(630)-252-3773 (off)/(630)-822-5625(Cell) Argonne National Laboratory
(630)-252-7187 (FAX) Argonne, IL 60439
-----------------------------------------------------------------------------------------------------

Experimental Physics and Industrial Control System

Experimental Physics and
Industrial Control System