Experimental Physics and
Industrial Control System

I have encountered the following error from asyn when I run my soft IOC with asyn R4.11.

2009/08/02 11:00:13.682 CAM:ASYN:IO: EOS TOO LONG

I get this error message each time an io operation is attempted on the GPIB device and the io operation is not performed.  The GPIB device is KS3988 CAMAC crate controller.

This IOC works fine with asyn R4.9.

Has R4.11 become more strict about sloppy programming?
Or do I need to set some asyn parameter, which for some reason either was not needed or did not matter with R4.9?
Anyway, I am not sure what the problem is and how to fix it.  For now I am back with R4.9.

Thanks,
Zen

Replies:

RE: Asyn R4.11 Mark Rivers

Navigate by Date:

Prev: EDM: Text Monitor Widget Szalata, Zenon M.

Next: RE: Asyn R4.11 Mark Rivers

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  <2009>  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: FW: EDM: Text Monitor Widget Szalata, Zenon M.

Next: RE: Asyn R4.11 Mark Rivers

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  <2009>  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024