Hi Zen,
Asyn only supports limited EOS lengths, one or two chars depending on the
low-level driver. However, StreamDevice supports any length. It works around the
limited EOS length of asyn.
Dirk
Szalata, Zenon M. wrote:
I have a simple soft IOC which uses asyn and streamdevice. It does IO
with KS3988 GPIB CAMAC crate controller. The IOC works correctly with
asyn R4.9. I have installed asyn R4.12 and my IOC does not work with
asyn R4.12. I get the following message: "EOS TOO LONG". I also tried
asyn R4.11 and R4.10 I see the same message with these the two versions
of asyn as I see with the latest.
How do I overcome this difficulty? Do these newer versions of asyn
require that I make some change to my IOC? Can someone help me with
this, please?
For now I am forced to stay with asyn R4.9.
Thanks,
Zen
--
Dr. Dirk Zimoch
Paul Scherrer Institut, WBGB/006
5232 Villigen PSI, Switzerland
Phone +41 56 310 5182
- References:
- asyn R4.10, R4.11, R4.12 Szalata, Zenon M.
- Navigate by Date:
- Prev:
RE: asyn R4.10, R4.11, R4.12 Mark Rivers
- Next:
Re: camonitor and caget - displaying unsigned longs in hexadecimal Ernest L. Williams Jr.
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
<2009>
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
RE: asyn R4.10, R4.11, R4.12 Szalata, Zenon M.
- Next:
Elcomat 3000 Pete R. Jemian
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
<2009>
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|