You are telling it that your VIPC616 is set up for A16 address 0x0000.
Is this correct? I've always put my cards at higher addresses than
this.
Mark
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of [email protected]
Sent: Wednesday, January 20, 2010 10:54 AM
To: [email protected]
Subject: Ipac with VIPC616
Hey All,
I'm trying to setup a SBS VIPC616 with one IP-OCTAL-232 IP-pack. The
jumper settings on the carrier have been checked and are correct. After
issuing ipacAddVIPC616, the module is still not found. Here's what I
see
on the IOC:
vxwrks@iocfel7 -> ipacAddVIPC616("0x0000,0x0A000000")
value = 0 = 0x0
vxwrks@iocfel7 -> ipacReport(2)
IP Carrier 0: SBS/GreenSpring VIPC616, 4 slots
C0 S0 : No Module
ID = 0xfbff0080, I/O = 0xfbff0000, Mem = 0x12000000
C0 S1 : No Module
ID = 0xfbff0180, I/O = 0xfbff0100, Mem = 0x12800000
C0 S2 : No Module
ID = 0xfbff0280, I/O = 0xfbff0200, Mem = 0x13000000
C0 S3 : No Module
ID = 0xfbff0380, I/O = 0xfbff0300, Mem = 0x13800000
value = 0 = 0x0
I've tried this with Ipac and Asyn version already installed here at
Jlab
and have setup my own using ipac-2.8 and asyn-4.11. Any ideas on why
the
module is not being initialized?
Wesley
- Replies:
- Re: Ipac with VIPC616 Wesley Moore
- References:
- Ipac with VIPC616 wmoore
- Navigate by Date:
- Prev:
Ipac with VIPC616 wmoore
- Next:
Re: Ipac with VIPC616 Wesley Moore
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
<2010>
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Ipac with VIPC616 wmoore
- Next:
Re: Ipac with VIPC616 Wesley Moore
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
<2010>
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|