Experimental Physics and
Industrial Control System

"Szalata, Zenon M." <[email protected]> · Mon, 10 Jan 2011 15:38:25 -0800

Thanks a lot.
Yes, I would like to get an update on the progress.  The camera is indeed GigE so there is hope that it will work.  We can wait a little longer for a solution.

Thank you again,
Zen

> -----Original Message-----
> From: [email protected] [mailto:[email protected]]
> Sent: Monday, January 10, 2011 1:36 AM
> To: Szalata, Zenon M.; [email protected]
> Subject: RE: JAI CM-140GE
> 
> Hi,
> 
> Almost... I'm working on a generic GigE vision driver, at the moment it
> only supports the prosilica and AVT cameras that I have here, but I'm
> working to make it more generic and make it support a JAI camera that we
> have here, the TMC-1405GE. If your camera supports the GigE vision
> standard and has a fairly standard register map it should work with my
> driver without too many modifications. I will keep you posted on my
> progress, do you have the camera already? I can send you what I have
> already if that is any help...
> 
> Thanks,
> 
> Tom Cobb,
> Diamond Light Source Ltd.
> Diamond House
> Harwell Science and Innovation Campus
> Didcot
> Oxfordshire
> OX11 0DE
> Tel +44 (0) 1235 778582
> > -----Original Message-----
> > From: [email protected]
> [mailto:[email protected]] On
> > Behalf Of Szalata, Zenon M.
> > Sent: 07 January 2011 22:28
> > To: EPICS Tech Talk
> > Subject: JAI CM-140GE
> >
> > Has anyone developed EPICS support for JAI CM-140GE (GigE) camera,
> preferably
> > using Mark River's area detector?
> >
> > Thanks,
> > Zen
> 
> 
> --
> This e-mail and any attachments may contain confidential, copyright and or
> privileged material, and are for the use of the intended addressee only. If you
> are not the intended addressee or an authorised recipient of the addressee
> please notify us of receipt by returning the e-mail and do not use, copy, retain,
> distribute or disclose the information in or attached to the e-mail.
> Any opinions expressed within this e-mail are those of the individual and not
> necessarily of Diamond Light Source Ltd.
> Diamond Light Source Ltd. cannot guarantee that this e-mail or any attachments
> are free from viruses and we cannot accept liability for any damage which you
> may sustain as a result of software viruses which may be transmitted in or with
> the message.
> Diamond Light Source Limited (company no. 4375679). Registered in England
> and Wales with its registered office at Diamond House, Harwell Science and
> Innovation Campus, Didcot, Oxfordshire, OX11 0DE, United Kingdom
> 
> 
> 

Experimental Physics and Industrial Control System

Experimental Physics and
Industrial Control System