Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  <20112012  2013  2014  2015  2016  2017  2018  2019  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  <20112012  2013  2014  2015  2016  2017  2018  2019 
<== Date ==> <== Thread ==>

Subject: WAGO 750 Stepper/DC-Drive Controller with EPICS?
From: "Heiniger Martin" <Martin.Heiniger@psi.ch>
To: <tech-talk@aps.anl.gov>
Date: Fri, 13 May 2011 11:52:08 +0200
Hello all,

Has somebody used a WAGO 750 Stepper Controller or DC-Drive Controller
together with EPICS?
Any information or an example is very welcome! Thank you.

(Here a list of the available HW:
http://www.wago.com/wagoweb/documentation/navigate/nm0dz__e.htm#stepper)

Best regards,
Martin
 
=========================================
Martin Heiniger
Common Applications
Control System SwissFEL
Paul Scherrer Institut (PSI)
WBGB/002
CH-5232 Villigen PSI
SWITZERLAND

Telefon: +41 (0)56 310 54 89
E-Mail: martin.heiniger@psi.ch
Internet: www.psi.ch
=========================================
 
 


Navigate by Date:
Prev: Re: Handling failures in st.cmd Till Straumann
Next: Positions Available at SLAC in Controls Leadership Shoaee, Hamid
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  <20112012  2013  2014  2015  2016  2017  2018  2019 
Navigate by Thread:
Prev: Re: Handling failures in st.cmd Andrew Johnson
Next: Positions Available at SLAC in Controls Leadership Shoaee, Hamid
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  <20112012  2013  2014  2015  2016  2017  2018  2019 
ANJ, 18 Nov 2013 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·