Hi,
This is actually a part of the Virtual Physical Laboratory:
http://www.colpus.me.uk/vplabd/node/6
You could contact John Nunn (under pricing tab).
Regards,
Austen.
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Paul Hamadyk
Sent: 11 April 2012 11:21
To: tech-talk
Subject: Re: help about labview gui of diamond light source
On Wed, 2012-04-11 at 16:26 +0800, Silver wrote:
> hi, all:
>
> In the before, I saw a labview demo program of diamond light source. Please see the attach file. In it, when adjusting the cathode heater or anode voltage, the electron status can be changed automatically. the GUI looks very cool. I want to try some similar labview GUIs in our control system while I am a newbie on labview. Does anyone know who is the author of this program? or anyone can give some source code of it?
> Thanks a lot for your help.
>
> Best regards
> Geyang 2012-04-11
These are Windows applications but there are also flash versions of this and other demos on the http://insidediamond.org/ web site.
I think that Diamond probably paid for these apps so I doubt if the source code would be made available, but you could contact someone in the Communications group to find out.
Paul.
--
This e-mail and any attachments may contain confidential, copyright and or privileged material, and are for the use of the intended addressee only. If you are not the intended addressee or an authorised recipient of the addressee please notify us of receipt by returning the e-mail and do not use, copy, retain, distribute or disclose the information in or attached to the e-mail.
Any opinions expressed within this e-mail are those of the individual and not necessarily of Diamond Light Source Ltd.
Diamond Light Source Ltd. cannot guarantee that this e-mail or any attachments are free from viruses and we cannot accept liability for any damage which you may sustain as a result of software viruses which may be transmitted in or with the message.
Diamond Light Source Limited (company no. 4375679). Registered in England and Wales with its registered office at Diamond House, Harwell Science and Innovation Campus, Didcot, Oxfordshire, OX11 0DE, United Kingdom
--
This e-mail and any attachments may contain confidential, copyright and or privileged material, and are for the use of the intended addressee only. If you are not the intended addressee or an authorised recipient of the addressee please notify us of receipt by returning the e-mail and do not use, copy, retain, distribute or disclose the information in or attached to the e-mail.
Any opinions expressed within this e-mail are those of the individual and not necessarily of Diamond Light Source Ltd.
Diamond Light Source Ltd. cannot guarantee that this e-mail or any attachments are free from viruses and we cannot accept liability for any damage which you may sustain as a result of software viruses which may be transmitted in or with the message.
Diamond Light Source Limited (company no. 4375679). Registered in England and Wales with its registered office at Diamond House, Harwell Science and Innovation Campus, Didcot, Oxfordshire, OX11 0DE, United Kingdom
- References:
- help about labview gui of diamond light source Silver
- Re: help about labview gui of diamond light source Paul Hamadyk
- Navigate by Date:
- Prev:
Re: help about labview gui of diamond light source Paul Hamadyk
- Next:
Re: Proposed support for additional Modbus data types haquin
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
<2012>
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: help about labview gui of diamond light source Paul Hamadyk
- Next:
DCT flag in record reference manual Abadie Lana
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
<2012>
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|