Experimental Physics and
Industrial Control System

Dear folks,

Release R3-0 of the synApps calc module is available at the following URL:

http://www.aps.anl.gov/bcda/synApps/calc/calc.html

This release works with EPICS base 3.14.12 and 3.15.0.1.

Please read the release notes before deploying this release.  There are new dependencies on MEDM and on autosave (if used).  Also, there is a non-backward-compatible change in the array-calc "{}" operator, and a tightening of permitted syntax for the "?:" operator.

http://www.aps.anl.gov/bcda/synApps/calc/calcReleaseNotes.html


-- 
Tim Mooney ([email protected]) (630)252-5417
Software Services Group (www.aps.anl.gov)
Advanced Photon Source, Argonne National Lab

Navigate by Date:

Prev: Question on configuring soft IOC server ports Mark Rivers

Next: Re: Question on configuring soft IOC server ports Ralph Lange

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  <2012>  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: Re: Question on configuring soft IOC server ports Andrew Johnson

Next: MVME5500 and Linux John William Sinclair

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  <2012>  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024