RE: EPICS base Installation Error- Need Help

[Mark Rivers <rivers@cars.uchicago.edu>]

Although Andrew said that not too many EPICS users run Fedora, we have been using it for many years as our primary EPICS development machine.  I know we have run at least Fedora Core 9, 14 and 15.  15 is what we are currently using.  This is the host that I use for developing many EPICS packages (asyn, areaDetector, modbus, mca, quadEM, etc.).  It is also our production machine that is used as the vxWorks boot host and to run about 20 soft IOCs.

Typically every distribution needs a few additional packages installed (readline, Motif, etc.) depending on what EPICS extensions and other modules you want to run.  This is done differently for each distribution, but I don't recall any common distributions that folks had real problems getting EPICS to build and run.

Mark

________________________________
From: tech-talk-bounces@aps.anl.gov [tech-talk-bounces@aps.anl.gov] on behalf of Ganesh Jangir [ganesh.jangir@tcs.com]
Sent: Friday, September 27, 2013 4:26 AM
To: anj@aps.anl.gov
Cc: tech-talk@aps.anl.gov
Subject: Re: EPICS base Installation Error- Need Help

Hi Andrew,

Could you please suggest the better Operating System (open source as well as proprietary) for EPICS , CSS development.
What are the packages, we must have other than c++ complier, perl and gnu make.

Thanks and Regards

Ganesh Jangir
Tata Consultancy Services
1, Mangaldas Road,
Pune - 411001,Maharashtra
India
Ph: +91 20 66086078,
M:+918793501030, +919461552772
Mailto: ganesh.jangir@tcs.com
Website: http://www.tcs.com


-----tech-talk-bounces@aps.anl.gov wrote: -----
To: Vikas Kumthekar <vikas.kumthekar@tcs.com>
From: Andrew Johnson
Sent by: tech-talk-bounces@aps.anl.gov
Date: 09/24/2013 08:41PM
cc: tech-talk@aps.anl.gov
Subject: Re: EPICS base Installation Error- Need Help


Hi Vikas,

As Mark Rivers said unless you actually need the Perl bindings to CA
your copy of Base has everything else built.  It looks like you need the
fedora RPM perl-Pod-Checker to get the missing executable.

On 09/24/2013 09:40 AM, Vikas Kumthekar wrote:
> I was just wondering if, there is any installation document which will
> help for the beginners like me.

There are not many EPICS users who run Fedora, and these kinds of
problems are specific to the distribution that you're running.  There
are documents in the base/documentation directory which give some advice
on building Base, but we don't have a supply of programmers who could
test building Base and write instructions for every Linux distribution.

- Andrew
--
Advertising may be described as the science of arresting the human
intelligence long enough to get money from it. -- Stephen Leacock


=====-----=====-----=====
Notice: The information contained in this e-mail
message and/or attachments to it may contain
confidential or privileged information. If you are
not the intended recipient, any dissemination, use,
review, distribution, printing or copying of the
information contained in this e-mail message
and/or attachments to it are strictly prohibited. If
you have received this communication in error,
please notify us by reply e-mail or telephone and
immediately and permanently delete the message
and any attachments. Thank you