Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  <20142015  2016  2017  2018  2019  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  <20142015  2016  2017  2018  2019 
<== Date ==> <== Thread ==>

Subject: Re: Device/Driver Support for Stepper Motor Control
From: Jens Eden <jens.eden@ptb.de>
To: <tech-talk@aps.anl.gov>
Date: Wed, 7 May 2014 17:10:57 +0200

Hello William,

I recommend the latest version from aps subversion repo
https://subversion.xray.aps.anl.gov/synApps/motor/
which has an important bug-fix.

Jens


Am 06.05.2014 21:51, schrieb Mark Rivers:
Yes, it supports soft IOC, and yes you use drvAsynIPPort.  You pass the name of the asynIPPort as the third argument to the omsMAXnetConfig command.

Mark


-----Original Message-----
From: tech-talk-bounces@aps.anl.gov [mailto:tech-talk-bounces@aps.anl.gov] On Behalf Of Weiwei Lu
Sent: Tuesday, May 06, 2014 2:43 PM
To: Ron Sluiter
Cc: tech-talk@aps.anl.gov
Subject: Re: Device/Driver Support for Stepper Motor Control

Hi Ron,

Thank you for the swift reply.  Just want to verify that Jens' asyn motor support for OMS MAXnet controller does support soft IOC, correct?  Besides, should I use asyn drvAsynIPPort as the driver support with Jen's asyn motor support?

Thanks,
William Lu

----- Original Message -----
From: "Ron Sluiter" <sluiter@aps.anl.gov>
To: "Weiwei Lu" <weiwei@jlab.org>, tech-talk@aps.anl.gov
Cc: "Jens Eden" <Jens.Eden@ptb.de>
Sent: Tuesday, May 6, 2014 3:26:00 PM
Subject: Re: Device/Driver Support for Stepper Motor Control


Hello William,

Jens Eden (PTB) added asyn motor support for both the OMS MAXv and the OMS MAXnet controllers. That support is available beginning with the latest release (R6-8) of the motor module.

Ron

On 5/6/2014 2:18 PM, Weiwei Lu wrote:


Hi,

We plan to use a soft IOC and an OMS MAXnet motion controller to control a stepper motor.  The soft IOC will communicate with the MAXnet motion controller's Ethernet interface.  What are the existing EPICS device/driver supports that we can use for this soft IOC application?  Can APS's Stepper/DC Motor Controller software or Mark Rivers' devMotorAsyn and drvMotorAsyn be used for this?  What are the pros and cons comparing these two technologies?  Are there other alternatives?

Advice is greatly appreciated.  Thank you in advance.

William Lu





Replies:
Re: Device/Driver Support for Stepper Motor Control J. Lewis Muir
References:
Re: Device/Driver Support for Stepper Motor Control Ron Sluiter
Re: Device/Driver Support for Stepper Motor Control Weiwei Lu
RE: Device/Driver Support for Stepper Motor Control Mark Rivers

Navigate by Date:
Prev: Future Roadmap of CSS Ganesh Jangir
Next: Re: [CSS] freeze and lost running PV in Boy Screens Hartman, Steven M.
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  <20142015  2016  2017  2018  2019 
Navigate by Thread:
Prev: RE: Device/Driver Support for Stepper Motor Control Mark Rivers
Next: Re: Device/Driver Support for Stepper Motor Control J. Lewis Muir
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  <20142015  2016  2017  2018  2019 
ANJ, 17 Dec 2015 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·