Re: synApps record

[priya tiwari <tiwaripriya013@gmail.com>]

Thanks actually problem was that ,path was not set in env-path file.

now prob. has been resolved..

On Wed, Aug 27, 2014 at 5:27 PM, Mark Rivers <rivers@cars.uchicago.edu> wrote:

Your Makefile has this line for example:

tmy_LIBS +=calc

But now this error message tells you what is wrong:

/usr/bin/ld: note: 'pvar_int_sscanRecordViewPos' is defined in DSO /home/srk/epics/synApps_5_7/support/sscan-2-9/lib/linux-x86/libsscan.so so try adding it to the linker command line

So you need to add this line to your Makefile
tmy_LIBS +=sscan

Mark

________________________________
From: tech-talk-bounces@aps.anl.gov [tech-talk-bounces@aps.anl.gov] on behalf of priya tiwari [tiwaripriya013@gmail.com]

Sent: Wednesday, August 27, 2014 12:11 AM
To: tech-talk@aps.anl.gov
Subject: Re: synApps record

Thanks for suggestion
when i added dbd file in make/src file then i got the error.................
/usr/bin/ld: tmy_registerRecordDeviceDriver.o: undefined reference to symbol 'pvar_int_sscanRecordViewPos'
/usr/bin/ld: note: 'pvar_int_sscanRecordViewPos' is defined in DSO /home/srk/epics/synApps_5_7/support/sscan-2-9/lib/linux-x86/libsscan.so so try adding it to the linker command line
/home/srk/epics/synApps_5_7/support/sscan-2-9/lib/linux-x86/libsscan.so: could not read symbols: Invalid operation
collect2: error: ld returned 1 exit status
make[3]: *** [tmy] Error 1
make[3]: Leaving directory `/home/srk/tt/tmyApp/src/O.linux-x86'
make[2]: *** [install.linux-x86] Error 2
make[2]: Leaving directory `/home/srk/tt/tmyApp/src'
make[1]: *** [src.install] Error 2
make[1]: Leaving directory `/home/srk/tt/tmyApp'
make: *** [tmyApp.install] Error 2


please see make file and config/release .

On Tue, Aug 26, 2014 at 7:22 PM, Mooney, Tim M. <mooney@aps.anl.gov<mailto:mooney@aps.anl.gov>> wrote:
Hi Priya,

If you've built synApps, there should be a dbd file with all the records from base and synApps in the xxx/dbd directory.  The synApps Makefile is sort of complicated, because it tries to build everything and also tries to not build modules that have been commented out of configure/RELEASE, but it's an example of what you can use in your own application's Makefile.  In fact, usually I start with a copy of the xxx module, and modify it to make my application.

Tim Mooney (mooney@aps.anl.gov<mailto:mooney@aps.anl.gov>) (630)252-5417
Software Services Group (www.aps.anl.gov<http://www.aps.anl.gov>)

Advanced Photon Source, Argonne National Lab

________________________________

From: tech-talk-bounces@aps.anl.gov<mailto:tech-talk-bounces@aps.anl.gov> [tech-talk-bounces@aps.anl.gov<mailto:tech-talk-bounces@aps.anl.gov>] on behalf of priya tiwari [tiwaripriya013@gmail.com<mailto:tiwaripriya013@gmail.com>]

Sent: Tuesday, August 26, 2014 1:03 AM

To: tech-talk@aps.anl.gov<mailto:tech-talk@aps.anl.gov>

Subject: synApps record

Hello
          I am trying to use other records of synApps which is not in VDCT for eg. scalcout,transform,asyn etc.I have installed synApps_5_7 in EPICS folder , then How to use synApps record in my VDCT application?
What changes are required to be made in my own directory?plz help me
                            Thanks in advance....