Re: Asyn

[priya tiwari <tiwaripriya013@gmail.com>]

Thanks Martin L.Smith

On Wed, Sep 17, 2014 at 10:34 PM, Martin L. Smith <mls@aps.anl.gov> wrote:

I do this now using a scalcout and stringout records as such:

record(stringout,"$(P)ReadDioIn") {
        field(DESC,"Read DIO Input Command")
        field(DTYP,"Soft Channel")
        field(UDF,"0")
        field(VAL,"/DIO/read")
}
record(scalcout,"$(P)DioIn") {
        field(DESC,"Read DIO Inputs")
        field(DTYP,"Soft Channel")
        field(CALC,"PRINTF('%s',AA)")
        field(INAA,"$(P)ReadDioIn.VAL NPP NMS")
        field(OUT,"$(P)DIO.AOUT PP NMS")
        field(SCAN,"2 second")
}

In this example every 2 seconds the scalcout processes and sends the string
/DIO/read to an asyn record AOUT field ($(P)DIO.AOUT) with a PP link which
causes the asyn record to process. So the string to send is in the stringout
record and the scalcout just formats the string.

Marty

On 09/17/2014 11:54 AM, priya tiwari wrote:

Actually i am just trying,it was not correct. but i want  give command in string
format from one record to AOUT field of asyn record.

On Wed, Sep 17, 2014 at 5:54 PM, Mark Rivers <rivers@cars.uchicago.edu
<mailto:rivers@cars.uchicago.edu>> wrote:

    Did you try connecting the OUT field of the sCalcout record to the AOUT
    field of the asyn record, using the PP attribute?

    Mark

    ________________________________
    From: tech-talk-bounces@aps.anl.gov <mailto:tech-talk-bounces@aps.anl.gov>
    [tech-talk-bounces@aps.anl.gov <mailto:tech-talk-bounces@aps.anl.gov>] on
    behalf of priya tiwari [tiwaripriya013@gmail.com
    <mailto:tiwaripriya013@gmail.com>]
    Sent: Wednesday, September 17, 2014 6:12 AM
    To: tech-talk@aps.anl.gov <mailto:tech-talk@aps.anl.gov>
    Subject: Asyn

    Hello,
                I put the command such as *IDN?\n in INP field of waveform
    record and i want to retrieve this command in AOUT field of ASYN record.How
    to link it plz give suggestions...


    i am trying like this but it is wrong plz give me actual solution. I am
    attaching snapshot.