Hi XuGuanglei,
Perhaps someone has already written EPICS support for that instrument. But if not it would be easy to write using asyn to communicate over TCP, and StreamDevice for EPICS device support.
There are lots of examples for similar devices. For example in the EPICS synApps "ip" package:
http://www.aps.anl.gov/bcda/synApps/ip/ip.html
This contains StreamDevice support for the Tabor 8024 Arbitrary Waveform Generator, and several devices from Stanford Research Systems, who make your SG384.
Mark
________________________________________
From: [email protected] [[email protected]] on behalf of 徐广磊 [[email protected]]
Sent: Thursday, December 11, 2014 12:26 AM
To: [email protected]
Subject: about signal generator's control
Hi,
Does anybody who knows how to use softioc to control signal generator directly through the ethernet?
Now, I have an signal generator which type is SG384.I want to realize remotre control,and finally the control can be used in PV channel.
Wich I have write clearly of my question.
XuGuanglei
IHEP,Beijing,CHINA
- References:
- about signal generator's control 徐广磊
- Navigate by Date:
- Prev:
Re: EPICS V4 Ralph Lange
- Next:
RE: Changing the Timeout for drvAsynSerialPort? Mark Rivers
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
<2014>
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
about signal generator's control 徐广磊
- Next:
Build system EXPAND not working with INC J. Lewis Muir
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
<2014>
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|