Re: problem with pointGreyApp.exe using AD 2-1

[Alireza Panna <apanna1236@gmail.com>]

Hello all, 

Thank you for all your help. Adding the dll paths in the batch file fixed it. Works like a charm.

Best,

Ali

--

Alireza Panna

University of Maryland, College Park

On Wed, Feb 25, 2015 at 2:32 PM, Zachary Brown <zab8@cornell.edu> wrote:

Alireza,

There should be a batch file dllPaths.bat that adds base/synApps/areaDetector /bin/ folders to your PATH.  I call this before running the st.cmd.  I can send you mine if you need it.

-ZB

On Wed, Feb 25, 2015 at 2:03 PM, Alireza Panna <apanna1236@gmail.com> wrote:

Hello tech-talkers,

I am having trouble running the pointGreyApp executable ( I did not get errors during compile time of ADPointGrey). The error says that pointGrey.dll is missing, however, I see that it is present in C:\Epics\support\areaDetector-2-1\ADPointGrey\bin\windows-x64

Maybe I missed some path definition but I can't figure it out. Below is my  envPath:

epicsEnvSet("ARCH","windows-x64")

epicsEnvSet("IOC","iocPointGrey")

epicsEnvSet("TOP","C:/Epics/support/areaDetector-2-1/ADPointGrey/iocs/pointGreyIOC")

epicsEnvSet("ADPOINTGREY","C:/Epics/support/areaDetector-2-1/ADPointGrey")

epicsEnvSet("SUPPORT","C:/Epics/support")

epicsEnvSet("AREA_DETECTOR","C:/Epics/support/areaDetector-2-1")

epicsEnvSet("EPICS_BASE","C:/Epics/base-3.14.12.4")

epicsEnvSet("ASYN","C:/Epics/support/asyn-4-26")

epicsEnvSet("ADCORE","C:/Epics/support/areaDetector-2-1/ADCore")

epicsEnvSet("CALC","C:/Epics/support/calc-3-4-2")

#epicsEnvSet("BUSY","C:/Epics/support/busy-1-6")

epicsEnvSet("SSCAN","C:/Epics/support/sscan-2-10")

epicsEnvSet("AUTOSAVE","C:/Epics/support/autosave-5-5")

I have the flycapture viewer installed along with their sdk as well. Epics base and Area detector are compiled dynamically (using MS Visual Studio 12). 

Any help will be appreciated.

--

Alireza Panna

University of Maryland, College Park