Chris:
Following up on your original message, you eventually identified and
resolved the problems you encountered when building base. In emails
offline from tech-talk, you asked about any simulated devices to test
with which to test EPICS or example files.
One very good example of a simulated device is the virtual linear
accelerator demo. Pick the most recent one from this page:
http://www.aps.anl.gov/epics/download/examples/index.php
The package provides simulation and a GUI (probably MEDM).
Another package available on the same page provides a complete EPICS
system on a bootable image: EPICSLive.zip
Hope this helps,
Pete
On 4/17/2015 11:39 PM, Chris Eckman wrote:
Hello all EPICS people,
I've been attempting to install EPICS to my computer running Linux Mint,
I am using an link:
http://www.aps.anl.gov/epics/tech-talk/2009/msg01867.php
Well I get to the 2nd instruction, namely "install base" and it says the
following when I make:
make -C ./configure install
make[1]: Entering directory
`/home/chris/Documents/EPICS/base-3.15.1/configure'
perl -CSD ../src/tools/makeMakefile.pl O.linux-x86 ../..
Cannot create O.linux-x86/Makefile at ../src/tools/makeMakefile.pl line 41.
make[1]: *** [O.linux-x86] Error 2
make[1]: Leaving directory
`/home/chris/Documents/EPICS/base-3.15.1/configure'
make: *** [configure.install] Error 2
This says that the perl command is not working for some reason, however
I know I installed perl. Does anyone know why this is giving me an
error or have you run into this issue yourself? Please help,
Thank you,
Chris
--
----------------------------------------------------------
Pete R. Jemian, Ph.D. <[email protected]>
Beam line Controls and Data Acquisition, Group Leader
Advanced Photon Source, Argonne National Laboratory
Argonne, IL 60439 630 - 252 - 3189
-----------------------------------------------------------
Education is the one thing for which people
are willing to pay yet not receive.
-----------------------------------------------------------
- References:
- Installing EPICS... error Chris Eckman
- Navigate by Date:
- Prev:
RE: Measurement Computing Linux C Drivers Lang, Keenan C.
- Next:
Re: EPICS installed, making ioc, not working... Ralph Lange
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
<2015>
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: Installing EPICS... error Pete Jemian
- Next:
New releases of areaDetector modules ADPerkinElmer, ADRoper, ADURL, ADmar345, and ADmarCCD Mark Rivers
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
<2015>
2016
2017
2018
2019
2020
2021
2022
2023
2024
|