RE: Oerlikon leybold MAG.DRIVE iS

["Heesterman, Peter J" <Peter.Heesterman@ccfe.ac.uk>]

Hi Pete,

 

Yes, I do.

 

This project is near complete, and has been commissioned here at JET.

 

We have 6 off MAG.DRIVE Digital here.

(I’m not quite sure whether your pump model is exactly the same?)

 

I haven’t made a public release, to date, but will do so shortly.

 

NB, see http://www.aps.anl.gov/epics/tech-talk/2015/msg01319.php - ISIS have 2 off the (older) model TD20 Classic.

My software supports both these types.

 

Cheers,

 

Peter.

 

 

From: tech-talk-bounces@aps.anl.gov [mailto:tech-talk-bounces@aps.anl.gov] On Behalf Of peter.leicester@diamond.ac.uk
Sent: 29 September 2015 16:22
To: tech-talk@aps.anl.gov
Subject: Oerlikon leybold MAG.DRIVE iS

 

Does anyone have an epics support module for an Oerlikon Leybold MAG.DRIVE iS turbo pump (TURBOVAC MAG W600 iP)?

This is an RS232 (or 485) device so perhaps someone has already written a streamDevice module for it they could share?

Thanks

 

Pete Leicester

Diamond Light Source

 

-- 

This e-mail and any attachments may contain confidential, copyright and or privileged material, and are for the use of the intended addressee only. If you are not the intended addressee or an authorised recipient of the addressee please notify us of receipt by returning the e-mail and do not use, copy, retain, distribute or disclose the information in or attached to the e-mail.
Any opinions expressed within this e-mail are those of the individual and not necessarily of Diamond Light Source Ltd.
Diamond Light Source Ltd. cannot guarantee that this e-mail or any attachments are free from viruses and we cannot accept liability for any damage which you may sustain as a result of software viruses which may be transmitted in or with the message.
Diamond Light Source Limited (company no. 4375679). Registered in England and Wales with its registered office at Diamond House, Harwell Science and Innovation Campus, Didcot, Oxfordshire, OX11 0DE, United Kingdom