Look at the screen shot for the NDPlugStdArrays plugin here:
http://cars9.uchicago.edu/software/epics/NDPluginStdArrays.html
To view the output of a plugin rather then the output of the detector you change the field labelled "Array port" from SIM1 to ROI1 or OVER1, etc.
That is true for all plugins. So the OVER1 plugin can get its data directly from the detector (SIM1 in this case) or from another plugin like ROI1 by changing that PV.
Mark
________________________________
From: [email protected] [[email protected]] on behalf of Phil Atkin [[email protected]]
Sent: Monday, December 14, 2015 11:43 AM
To: [email protected]
Subject: Newbie: How do I view the output of an areaDetector plugin?
Imagine for a moment that I know nothing of EPICS, yet have somehow managed to build a working set of software (on Windows) including areaDetector R2-4. I've even got the ImageJ plugin displaying live images from the simulated detector.
I can configure plugins such as the ROI through the medm interface. How can I view the output of a plugin, instead of the simulated detector?
Best regards,
Phil
--
[cid:[email protected]]Pixel Analytics is a limited company registered in England. Company number: 7747526; Registered office: 93A New Road, Haslingfield, Cambridge CB23 1LP
![PNG image](pngACOKZCOWM_.png)
- References:
- Newbie: How do I view the output of an areaDetector plugin? Phil Atkin
- Navigate by Date:
- Prev:
Re: MEDM Extension Make Failed on Ubuntu 15.10 Andrew Johnson
- Next:
RE: areaDetector: plugin in separate dll Mark Rivers
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
<2015>
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: Newbie: How do I view the output of an areaDetector plugin? Andrew Johnson
- Next:
areaDetector: plugin in separate dll Phil Atkin
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
<2015>
2016
2017
2018
2019
2020
2021
2022
2023
2024
|