Hi Ken,
We have EPICS support for the Danfysik 892 power supplies here at
NSLS-II. If that's also the same command set, I can send you the
details.
Wayne
On Thu, Jan 28, 2016 at 07:41:08PM +0000, Schrock, Ken wrote:
> Hello,
>
> We are purchasing several Danfysik model 9100 power supplies for FRIB at MSU. Before developing a new EPICS driver, we are curious if any users already have one for either the 8500 or 9100? Danfysik told us that the command set is the same for both models.
>
> Regards,
>
> Ken Schrock
> Electrical Staff Engineer
> Facility for Rare Isotope Beams
> Michigan State University
> 640 South Shaw Lane
> East Lansing, MI 48824, USA
> Tel. 517-908-7193
> Email: [email protected]<mailto:[email protected]>
>
> [cid:[email protected]]
>
>
>
>
>
>
>
--
Wayne Lewis
NSLS-II Controls Group
Brookhaven National Laboratory
(p) +1 (631) 344 5936
(f) +1 (631) 344 8085
(e) [email protected]
(w) www.bnl.gov/nsls2
- Replies:
- Re: Danfysik 8500 or 9100 power supply driver Jack
- References:
- Danfysik 8500 or 9100 power supply driver Schrock, Ken
- Navigate by Date:
- Prev:
Danfysik 8500 or 9100 power supply driver Schrock, Ken
- Next:
devlib2 2.7 release Michael Davidsaver
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
<2016>
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Danfysik 8500 or 9100 power supply driver Schrock, Ken
- Next:
Re: Danfysik 8500 or 9100 power supply driver Jack
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
<2016>
2017
2018
2019
2020
2021
2022
2023
2024
|