Re: Pilatus AD 2-4 errors

["Pearson, Matthew R." <pearsonmr@ornl.gov>]

Hi,

For problem 1), once you find out which command is generating that error, you could also try manually typing it on the camserver command line. If the problem still occurs, I would contact Dectris.

Cheers,
Matt


> On Aug 8, 2016, at 6:22 PM, Miceli, Antonino <amiceli@anl.gov> wrote:
> 
> Hi all, 
>  
> We are hunting down some intermittent IOC crashes.  We are getting the following errors in a Pilatus AD 2-4 ioc which  may or not be related to the intermitted ioc crashing.
>  
> 1.)    Any time we change the exposure time, period, etc we get an error like this:
> 2016/08/08 17:00:03.577 pilatusDetector:readCamserver unexpected response from camserver, no OK, response=15 ERR Not applicable to single module detectors
> 2.)    Every once in a while get this error:
> write_it: fchmod returned -1
>  
> The detector seems to run to acquire images ok, except for these intermittent crashes (every 80k images or so).
>  
> Thanks, 
> Nino