I see the expected space with 3.15.3 and 3.16.1.
What do you see if you run the following?
> caget -F '|' V:1-SR:C30-MG:GIRDER1{QH3:2981}Fld:I
On 07/14/2017 05:47 PM, Shen, Guobao wrote:
> Hi,
> Does any one notice the problem with CLI tool with caget?
> There is no space in the result between pv name and result.
>
> For example:
> $ caget V:1-SR:C30-MG:GIRDER1{QH3:2981}Fld:I
> V:1-SR:C30-MG:GIRDER1{QH3:2981}Fld:I-1.75358
>
> There is no space between the value (-1.75358) and the pv name
> (V:1-SR:C30-MG:GIRDER1{QH3:2981}Fld:I).
>
> I am using Red Hat Enterprise Linux Workstation release 7.3 (Maipo) with
> R3.15.5.
>
> Thanks,
> Guobao
- Replies:
- RE: ca CLI tool display problem Shen, Guobao
- References:
- ca CLI tool display problem Shen, Guobao
- Navigate by Date:
- Prev:
RE: clone R3.16 error Shen, Guobao
- Next:
RE: ca CLI tool display problem Shen, Guobao
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
<2017>
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
ca CLI tool display problem Shen, Guobao
- Next:
RE: ca CLI tool display problem Shen, Guobao
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
<2017>
2018
2019
2020
2021
2022
2023
2024
|