On 08/13/2017 03:28 PM, Hidas, Dean wrote:
> Greetings EPICS Experts,
>
> I am trying to dump archive data for some setpoints but am only interested in values when they change. Is there an easy way to only print out values only once they change? I was trying something like the following:
>
> arget -s '2016-8-1 00:00:00' -e '2017-8-1 00:00:00' -c 1000 PVNAME
>
> but this gives:
> ...
> 2016-10-19 16:58:58.343624 220.0
> 2016-10-19 16:58:59.367182 220.0
> 2016-10-19 16:58:59.877238 220.0
> 2016-10-19 16:59:00.399215 220.0
> ...
At first glance this seems like a mis-configuration of the archiver, or
noise. I certainly wouldn't want so much redundant data to be stored.
In either case, I'd suggest looking at the ADEL field of this record to
see if it should be increased.
- Replies:
- Re: Archive Dump on Change Only Maren Purves
- References:
- Archive Dump on Change Only Hidas, Dean
- Navigate by Date:
- Prev:
Re: Building CSS from scratch for my own product Jörn Dreyer
- Next:
Re: Building CSS from scratch for my own product Kasemir, Kay
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
<2017>
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
RE: Archive Dump on Change Only Laznovsky Michael (PSI)
- Next:
Re: Archive Dump on Change Only Maren Purves
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
<2017>
2018
2019
2020
2021
2022
2023
2024
|