1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 <2018> 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 <2018> 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | Re: Controling a slit system with 2 hard and 4 soft motorrs |
From: | "Mooney, Tim M." <[email protected]> |
To: | "Goetze, Kurt A." <[email protected]>, Torsten Bögershausen <[email protected]>, "[email protected]" <[email protected]> |
Date: | Thu, 8 Mar 2018 17:20:59 +0000 |
There is also, in the optics module, 2slit_soft.vdb, which uses soft motor records, instead of ao records, for center and width.
Tim Mooney ([email protected]) (630)252-5417
Beamline Controls Group (www.aps.anl.gov) Advanced Photon Source, Argonne National Lab From: [email protected] <[email protected]> on behalf of Goetze, Kurt A. <[email protected]>
Sent: Thursday, March 8, 2018 10:51:13 AM To: Torsten Bögershausen; [email protected] Subject: RE: Controling a slit system with 2 hard and 4 soft motorrs Hi Torsten,
The synApps optics module has support for this type of thing: https://github.com/epics-modules/optics/blob/master/opticsApp/Db/2slit.db Kurt -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Torsten Bögershausen Sent: Thursday, March 08, 2018 10:40 AM To: [email protected] Subject: Controling a slit system with 2 hard and 4 soft motorrs Hej motorists, I recently learned about the transform record, which can be used to control a slit with 2 physical axes in the way that you can set the values for GAP and CENTER and the position of the physical blades are calculated. (Or vice versa) Does anybody have a super-duper-luxus template file which uses 4 soft motors together with some calc and transform records ? Thanks in advance /Torsten |