Experimental Physics and Industrial Control System
My problem is I am not working with an actual motor that works with counts but a SourceMeter which reads and writes floating point values. I could set MRES to a very small number, but I may lose some range or resolution since this device measures in the femtovolts and Motor Record uses only a 32-bit integer to store position. Maybe I should not have used motor record for this task (it works very nicely otherwise though).
Alex
-----Original Message-----
From: Kevin Peterson [mailto:[email protected]]
Sent: Thursday, March 15, 2018 12:51 PM
To: Mark Rivers <[email protected]>; Sobhani, Bayan <[email protected]>; [email protected]
Subject: Re: Motor Record not moving distances less than .5
On 03/15/2018 11:48 AM, Mark Rivers wrote:
> If not don't worry about ERES or UEIP, and just set MRES to 1/(steps per engineering unit).
Or leave the MRES at 1 and work in units of steps.
Kevin
- Replies:
- RE: Motor Record not moving distances less than .5 Mark Rivers
- References:
- Motor Record not moving distances less than .5 Sobhani, Bayan
- Re: Motor Record not moving distances less than .5 Kevin Peterson
- RE: Motor Record not moving distances less than .5 Sobhani, Bayan
- Re: Motor Record not moving distances less than .5 Kevin Peterson
- RE: Motor Record not moving distances less than .5 Mark Rivers
- Re: Motor Record not moving distances less than .5 Kevin Peterson
- Navigate by Date:
- Prev:
Re: Motor Record not moving distances less than .5 Kevin Peterson
- Next:
RE: Motor Record not moving distances less than .5 Mark Rivers
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
<2018>
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: Motor Record not moving distances less than .5 Kevin Peterson
- Next:
RE: Motor Record not moving distances less than .5 Mark Rivers
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
<2018>
2019
2020
2021
2022
2023
2024