UEIP, MRES, and ERES were:
UEIP: "No"
MRES: 1
ERES: 1
If I try setting UEIP to "Yes", it does not get set and the value remains "No". If I try setting ERES to .1, and then setting UEIP to "Yes", I get the following error message:
Illegal choice PV: alexHost:testMotor2.UEIP error detected in routine: dbFastLinkConv(cvt_st_menu)
Alex
-----Original Message-----
From: Kevin Peterson [mailto:[email protected]]
Sent: Thursday, March 15, 2018 10:50 AM
To: Sobhani, Bayan <[email protected]>; [email protected]
Subject: Re: Motor Record not moving distances less than .5
Alex,
If UEIP is "No", the smallest move that can be made is determined by the MRES. If UEIP is "Yes", the smallest move that can be made is determined by the ERES.
What is the value of these fields for your motor: UEIP, MRES, ERES?
Kevin
- Replies:
- Re: Motor Record not moving distances less than .5 Kevin Peterson
- References:
- Motor Record not moving distances less than .5 Sobhani, Bayan
- Re: Motor Record not moving distances less than .5 Kevin Peterson
- Navigate by Date:
- Prev:
Re: Motor Record not moving distances less than .5 Kevin Peterson
- Next:
Re: SMOO expects constant Southern, Tim
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
<2018>
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: Motor Record not moving distances less than .5 Kevin Peterson
- Next:
Re: Motor Record not moving distances less than .5 Kevin Peterson
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
<2018>
2019
2020
2021
2022
2023
2024
| 
·
Home
·
News
·
About
·
Base
·
Modules
·
Extensions
·
Distributions
·
Download
·