| 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 <2018> 2019 2020 2021 2022 2023 2024 2025 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 <2018> 2019 2020 2021 2022 2023 2024 2025 |
| <== Date ==> | <== Thread ==> |
|---|
| Subject: | RE: Network errors on a 6100 (running RTEMS 4.10.2) |
| From: | Mark Engbretson <[email protected]> |
| To: | 'Ricardo Cardenes' <[email protected]>, 'Talk EPICS Tech' <[email protected]> |
| Date: | Tue, 10 Jul 2018 07:40:14 -0500 |
Have you tried plugging the 6100 into a dumb hub or a switch? I know that this seems odd, but at various times noise or other environmental variables have caused almost exactly the problem that you have, and sticking a dumb hub between the 61000 and wherever you normally plug into the network sometimes makes the issue go away. From: [email protected] <[email protected]> On Behalf Of Ricardo Cardenes Hi, I got a 6100 that was booting correctly, but then refusing to mount the file system over NFS (and complaining also about NTP). If found an old message that matched my problem, and an answer suggesting to force the speed in the switch (down to 100Mbps) instead of letting the board auto-negotiate it. Till Straumann replied that this should not be necessary, as those boards are known to be working properly with Gigabit Ethernet, but this actually worked for me (!!) Has anyone else experienced the same problem? Any hints/solutions? Cheers, Ricardo |