Imagine an EPICS developer with no experience in working with (coordinated) scanning application.
The sub-units, of the system in need of scanning feature, include timing system with precision triggering and timestamping, 1 to several axes of motion, control of HV bias and 1 to several channels of data acquisition. You can assume that the (low-level) EPICS modules supporting the hardware are under my control already, I'm interested in orchestrating the scan using above constituents.
What would be preferred approach to tackle this subject with EPICS in 2019?
TIA,
Hinko
- Replies:
- Re: Scanning 101 Mark Rivers via Tech-talk
- Re: Scanning 101 Jemian, Pete R. via Tech-talk
- Navigate by Date:
- Prev:
Re: registerRecordDeviceDriver.obj unresolved external symbols Torsten Bögershausen via Tech-talk
- Next:
Ip kernel mbuf starvation on RTEMS 4.11 Antonio Lucio via Tech-talk
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
<2019>
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
RE: Scanivalve DTS units Evans, Richard K. (GRC-H000) via Tech-talk
- Next:
Re: Scanning 101 Mark Rivers via Tech-talk
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
<2019>
2020
2021
2022
2023
2024
|